Product Name: No. 18 child test finger, No. 18 test rod, test piece 18

Product model: BND-18

Child test finger, number 18 child test finger

I. Basic introduction:
1. Made according to GB4706.21-2008, IEC61032-1997 and UL.
2. Children's test finger (No.18 test rod) is an essential instrument for electric shock protection test of household and similar electrical appliances. nbsp;
Comply with IEC61032 Figure 12 Test fixture 18 requirements, used to simulate whether children older than 36 months and less than 14 years old touch hazardous parts.

II. Technical parameters of children's test curved finger:

1. Curved finger diameter: 8.6mm
2. Head radius: 4.3mm
3. Total length of curved finger: 57.9mm (19.3mm for each of the three sections)
4. First handle diameter: 38.4mm
5. First handle length: 101.6mm
6. Diameter of the second section handle: 38.1mm
7. Second section handle length: 451.6mm

8. Reference standard: IEC61032:1997 Figure 12, GB4706.21-2008

Third, the use method of children's test bent finger: the metal part of the test probe cannot touch the live parts or be close to the dangerous parts, and the plastic baffle cannot enter. According to the quoted standards vary, detailed tests should be carried out according to relevant standards. This description is based only on IEC 61032 GB16842.

Four, children's test curved finger precautions: this product is a precision stainless steel product, use gently, pay attention to maintenance.
 

Product Name: No. 19 child test finger, No. 19 test rod, test piece 19

Product model: BND-19

I. Basic introduction of children's test finger bending:

1. Made according to GB4706.1, IEC61032-1997 and UL.
2, No. 19 children's test finger (No. 19 test rod) is an essential instrument for household and similar electrical protection against electric shock test.

Comply with IEC61032 Figure 13 Test fixture 19 requirements, used to simulate whether children aged 36 months and below touch hazardous parts.
II. Technical parameters of children's test curved finger:
1. Curved finger diameter: 5.6mm
2. Head radius: 2.8mm
3. Total length of curved finger: 44mm (total length of three sections)
4. First handle diameter: 25.9mm
5. First handle length: 101.6mm
6. Diameter of the second section handle: 25.4mm
7. Length of the second section handle: 464.3mm
8. Reference standard: IEC61032:1997  Figure 13, GB4706.1
Third, the use method of children's test bent finger: the metal part of the test probe cannot touch the live parts or be close to the dangerous parts, and the plastic baffle cannot enter.
According to the quoted standards vary, detailed tests should be carried out according to relevant standards. This description is based only on IEC 61032 GB16842.
Four, children's test curved finger precautions: this product is a precision stainless steel product, use gently, pay attention to maintenance.